Kisaragi poncho are the answer to layering over kimono sleeve tops and dresses. These have 2 tie closures that create an elegant cross-over silhouette. The kisaragi can also be worn open as a shawl/cardigan.
・Made of a warm wool blend
・Hand rubber print application
※Each piece is cut uniquely from the printed textile. Therefore, print placement will vary and cannot be selected.
※Garment may have a noticeable scent initially, but this poses no harm to human health and will dissipate when aired out.
※Rubber printed sections may stick on itself when pressed and folded for extended periods of time. Loosen gently before wash and wear.
※Always wash in a mesh laundry bag, cold water and delicate cycle. Mild, non-bleach detergent recommended.
※Do not leave soaking as color bleeding may occur.
※Do not wash with white or light colored garments to prevent color transfer.
※Color may rub onto or from other garments through repeated contact.
※Do not subject rubber print portions to abrasive wash as this may cause damage.
※Iron indirectly with protective layer such as a towel between iron and garment.
※Size and shape may change slightly with wash; reshape gently when laying flat or hanging up to air dry.
※Do not machine tumble dry.
※※ Model is 161cm/5’3″ ※※
ONE SIZE/F (Length:75cm/29.5in, Sleeves (from mid back to cuff):66cm/25.9in)
※Size dimensions may vary slightly from those listed above due to the knitted material used.
●Material: Wool 62%, Polyester 32%, Nylon 3%, Acrylic 3%
●Print by Quester
●Manufactured by Cam International
●Made in Japan